留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

超超临界锅炉过热器管超温蠕变应力松弛规律研究

林齐叠 严祯荣 王化南 陈乐 卫荆涛

林齐叠, 严祯荣, 王化南, 陈乐, 卫荆涛. 超超临界锅炉过热器管超温蠕变应力松弛规律研究[J]. 上海工程技术大学学报, 2021, 35(4): 333-339.
引用本文: 林齐叠, 严祯荣, 王化南, 陈乐, 卫荆涛. 超超临界锅炉过热器管超温蠕变应力松弛规律研究[J]. 上海工程技术大学学报, 2021, 35(4): 333-339.
LIN Qidie, YAN Zhenrong, WANG Huanan, CHEN Le, WEI Jingtao. Study on relaxation rule of over temperature creep stress in superheater tube of ultra-supercritical boiler[J]. Journal of Shanghai University of Engineering Science, 2021, 35(4): 333-339.
Citation: LIN Qidie, YAN Zhenrong, WANG Huanan, CHEN Le, WEI Jingtao. Study on relaxation rule of over temperature creep stress in superheater tube of ultra-supercritical boiler[J]. Journal of Shanghai University of Engineering Science, 2021, 35(4): 333-339.

超超临界锅炉过热器管超温蠕变应力松弛规律研究

基金项目: 上海市市场监督管理局科技资助项目(NO:2021-27)
详细信息
    作者简介:

    林齐叠(1995−),男,在读硕士,研究方向为特种设备安全技术. E-mail:875557423@qq.com

    通讯作者:

    严祯荣(1972−),男,教授,博士,研究方向为能源清洁利用和设备安全技术. E-mail:yanzr2010@163.com

  • 中图分类号: X933

Study on relaxation rule of over temperature creep stress in superheater tube of ultra-supercritical boiler

  • 摘要: 超超临界锅炉高温过热器集箱出口区域的过热器管易处于超温运行的环境,产生蠕变应力松弛导致材料失效. 基于Norton蠕变模型,以烟气温度750℃、蒸汽温度600℃、蒸汽压力26 MPa的运行工况,模拟T91过热器管壁在长时间热诱导中产生的应力松弛行为及蠕变分布. 模拟结果显示,过热管应力松弛现象首先发生在管内壁面,随着时间累计沿着径向方向扩散;10000 h后内壁面出现应力松弛且松弛加速;同时管壁面在应力松弛的过程中发生高温蠕变行为,且蠕变行为首先出现在内壁面并沿着径向扩散,内壁面蠕变程度高于外壁面;10000 h后管壁面厚度开始减薄. 研究结果表明:超超临界锅炉过热器管超温运行10000 h是蠕变应力松弛到蠕变损伤的时间拐点.
  • 图  1  过热器管模型图

    Figure  1.  Superheater tube model diagram

    图  2  过热器管网格图

    Figure  2.  Superheater tube grid diagram

    图  3  过热器管壁温度场分布

    Figure  3.  Temperature field distribution of tube wall of superheater

    图  4  过热器管壁应力分布规律

    Figure  4.  Stress distribution law in tube wall

    图  5  管壁径向应力随时间变化

    Figure  5.  Variation of radial stress of tube wall with time

    图  6  不同时间壁面径向位置应力分布

    Figure  6.  Stress distribution in radial position of wall surface at different times

    图  7  过热器管壁蠕变分布图

    Figure  7.  Creep distribution of superheater tube wall

    图  8  不同时间过热器管壁径向蠕变分布

    Figure  8.  Radial creep distribution of superheater tube wall at different times

    图  9  壁厚随蠕变时间的变化

    Figure  9.  Variation of wall thickness with creep time

    表  1  T91物性参数

    Table  1.   Physical parameters of T91

    参数温度/℃
    500600700
    导热系数/(W·m−1·K−1) 29 29 29
    线膨胀系数/K−1 1.21×10−5 1.24×10−5 1.26×10−5
    比热容/
    (J·kg−1·K−1)
    630 800 860
    密度/(kg·m−3) 7770 7770 7770
    弹性模量/GPa 181 168 165
    泊松比 0.3 0.3 0.3
    屈服强度/MPa 410 326 158
    下载: 导出CSV

    表  2  烟气与蒸汽物理参数

    Table  2.   Physical parameters of flue gas and steam

    蒸汽压力/
    MPa
    蒸汽温度/
    烟气温度/
    蒸汽换热系数/
    (W·m−2·℃−1)
    烟气换热系数/
    (W·m−2·℃−1)
    26 600 750 2053.65 123.51
    下载: 导出CSV

    表  3  网格统计

    Table  3.   Grid statistics

    最小尺
    寸/mm
    平均尺
    寸/mm
    四面体
    数量/个
    三角形
    数量/个
    顶点数
    量/个
    边单元
    数量/个
    网格顶点
    数量/个
    0.19530.6586101952101721649619563
    下载: 导出CSV

    表  4  T91钢蠕变参数

    Table  4.   Creep parameters of T91 steel

    参数温度/℃
    600620625
    n 16.36 14.25 7.70
    B 1.259×10−40 7.409×10−35 3.786×10−19
    下载: 导出CSV

    表  5  T91过热器管壁面不同径向位置仿真与试验等效应力

    Table  5.   Simulation and experimental equivalent stress of T91 superheater tube wall at different radial positions

    过热器管壁径向位置/mm10.114.519.0
    10 h后应力仿真结果/MPa 62.3 30.1 18.2
    10 h后应力试验值/MPa 63.5 30.9 19.0
    104 h后应力仿真结果/MPa 58.7 31.2 18.2
    104 h后应力试验值/MPa 57.4 30.5 17.8
    105 h后应力仿真结果/MPa 51.0 32.1 18.7
    105 h后应力试验值/MPa 52.3 34.7 20.9
    下载: 导出CSV

    表  6  T91过热器管壁面厚度仿真与试验测量值

    Table  6.   Simulation and experimental measurements of tube wall thickness of T91 superheater

    参数仿真值试验测量值
    壁面厚度/mm8.9968.994
    下载: 导出CSV
  • [1] 何晓梅, 罗昌福, 刘漫博. 超超临界火电机组的选材及国产化进程[J] . 热加工工艺,2012,41(22):116 − 119.
    [2] 喻聪, 司风琪, 李敏, 等. 基于燃烧与水动力耦合模型的锅炉蒸汽管超温特性研究[J] . 热能动力工程,2021(8):92 − 98.
    [3] NGUYEN V P, IBUPOTO F A, LI Q P, et al. Creep lifetime prediction of 9Cr-1Mo (grade T91) steel via small punch creep tests and hierarchical multiscale analysis[J] . Materials at High Temperatures,2020,37(6):462 − 477. doi: 10.1080/09603409.2020.1824852
    [4] LOK V, LE T G, YU J M, et al. Changes in creep property and precipitates due to aging of T91 steel after long-term service[J] . Journal of Mechanical Science and Technology,2020,34(8):3283 − 3293. doi: 10.1007/s12206-020-0720-4
    [5] XUE F, CHENG T L, CARNEY C S, et al. Oxide scale exfoliation analysis of type T91 SS boiler tubes[J] . Materials Performance,2020,59(12):40 − 44.
    [6] 曹宇, 刘川槐, 潘卫国, 等. T91/TP347H异种钢焊接接头蠕变行为分析及寿命预测[J] . 动力工程学报,2021,41(8):707 − 712.
    [7] 张力文, 张小文, 宋继萍. 金属蠕变疲劳寿命预估模型研究进展[J] . 工业加热,2021,50(2):36 − 40. doi: 10.3969/j.issn.1002-1639.2021.02.010
    [8] 涂善东, 轩福贞, 王卫泽. 高温蠕变与断裂评价的若干关键问题[J] . 金属学报,2009,45(7):781 − 787. doi: 10.3321/j.issn:0412-1961.2009.07.002
    [9] HYDE T H, BECKER A A, SUN W, et al. Determination of creep properties for P91 weldment materials at 625 ℃[C]//Processing International Conference on Mechanics and Materials in Design, Chapter IV, Welds at High Temperature(WELDON)in Design. 2006: A0402. 0405.
    [10] HYDE T H, SUN W. Effect of bending load on the creep failure behavior of a pressurised thick walled CrMoV pipe weldment[J] . International Journal of Pressure Vessels and Piping,2002,79(5):331 − 339. doi: 10.1016/S0308-0161(02)00027-3
    [11] HYDE T H, SUN W, BECKER A A, et al. Life prediction of repaired welds in a pressurised CrMoV pipe with incorporation of initial damage[J] . International Journal of Pressure Vessels and Piping,2004,81(1):1 − 12. doi: 10.1016/j.ijpvp.2003.12.015
    [12] HYDE T H, BECKER A A, SUN W, et al. Finite-element creep damage analyses of P91 pipes[J] . International Journal of Pressure Vessels and Piping,2007,83(11-12):853 − 863.
    [13] 王进峰, 邢迪雄, 王洪洲, 等. P91钢高温蠕变数值模拟与实验研究[J] . 中国工程机械学报,2020,18(4):283 − 287.
    [14] 韩笑, 余海洋, 周帼彦, 等. 基于固支直杆弯曲小试样的P91/P92钢蠕变性能对比评价研究[J] . 压力容器,2021,38(4):1 − 10. doi: 10.3969/j.issn.1001-4837.2021.04.001
    [15] 刘长军, 闫阿晨, 谈建平, 等. 全循环周期和保载时间对P91钢蠕变−疲劳裂纹扩展行为的影响[J] . 动力工程学报,2019,39(11):947 − 952.
    [16] 任海云, 陈辉, 王风涛, 等. 压力容器不连续区的有限元分析及优化设计[J] . 机械工程师,2011(7):104 − 105. doi: 10.3969/j.issn.1002-2333.2011.07.051
    [17] SAWADA K, SEKIDO K, KIMURA K, et al. Effect of Init ial Microstructure on Creep Strength of ASME Grade T91 Steel[J] . ISIJ International,2020,60(2):382 − 391. doi: 10.2355/isijinternational.ISIJINT-2019-358
    [18] GB/T 5310-2017, 高压锅炉用无缝钢管[S].
    [19] 潘成飞. 基于不同方法的9Cr-1Mo钢高温蠕变寿命预测研究[D]. 西安: 西北大学, 2017.
    [20] PAN J P, TU S H, SUN G L, et al. High-temperature creep properties and life predictions for T91 and T92 steels[J] . IOP Conference Series:Materials Science and Engineering,2018,292(1):012098.
  • 加载中
图(9) / 表(6)
计量
  • 文章访问数:  2022
  • HTML全文浏览量:  395
  • PDF下载量:  208
  • 被引次数: 0
出版历程
  • 收稿日期:  2021-09-07
  • 刊出日期:  2022-02-23

目录

    /

    返回文章
    返回