2018 Vol. 32, No. 1

Display Method:
Study on Catalytic Performance of Cerium Oxide Nanocrystals with Exposed High-Energy Facet for Soot Particles
DAI Yuegang, WANG Yiqi, ZHANG Xiong, ZHAI Guangjun, WANG Jinguo
2018, 32(1): 1-7. doi: 10.3969/j.issn.1009-444X.2018.01.001
Abstract:
2018, 32(1)
Abstract:
Melting and Heat Transfer Characteristics of PCM for Power Battery Thermal Management
YANG Huan, ZHANG Hengyun, SUI Yang, WU Qingyu
2018, 32(1): 8-14. doi: 10.3969/j.issn.1009-444X.2018.01.003
Abstract:
Microstructure and Fatigue Properties of Welded Joint for AA6082 Aluminum Alloy by MIG Welding
REN Xingxing, YANG Shanglei, WANG Luxiang, ZHANG Yuanjia
2018, 32(1): 15-19,24. doi: 10.3969/j.issn.1009-444X.2018.01.004
Abstract:
Simulation and Experimental Verification of Stress Power Spectral Density for Thin Plate
QI Xiquan, GUO Hui, WANG Yansong, LIU Ningning
2018, 32(1): 20-24. doi: 10.3969/j.issn.1009-444X.2018.01.005
Abstract:
Analysis of Current Reversible Chopper Circuit Based on Matlab
YUE Wei, YANG Hui, LI Guojing
2018, 32(1): 25-29. doi: 10.3969/j.issn.1009-444X.2018.01.006
Abstract:
Stripe Center Extraction Method of Three-Line Structured Light
WU Fang, MAO Jian, ZHOU Yufeng, LI Qing
2018, 32(1): 30-33,38. doi: 10.3969/j.issn.1009-444X.2018.01.007
Abstract:
Kinematics Analysis of 6-UPS Walking Parallel Kinematic Machine
CAO Yindong, XU Yong
2018, 32(1): 34-38. doi: 10.3969/j.issn.1009-444X.2018.01.008
Abstract:
Programming Method of Additive Manufacturing Based on RobotStudio Platform
JIANG Qi, ZHANG Peilei, NIE Yunpeng
2018, 32(1): 39-44. doi: 10.3969/j.issn.1009-444X.2018.01.009
Abstract:
Cutting Force Analysis of Cutting Tool for Plants in Different Environments
WANG Dandan, ZHANG Qingli, HUANG Lixin, XU Sheng
2018, 32(1): 45-48. doi: 10.3969/j.issn.1009-444X.2018.01.010
Abstract:
Influence of Open Residential Communities on Urban Road Traffic
CHEN Mingyi, XIAO Xiang, LIU Fuyao, XU Weitian, LIN Shuying
2018, 32(1): 49-52. doi: 10.3969/j.issn.1009-444X.2018.01.011
Abstract:
Design of New Type Brake Pedal System for Racing Car
CHEN Siyu, LI Chuanchang, WEI Jiacheng
2018, 32(1): 53-57. doi: 10.3969/j.issn.1009-444X.2018.01.012
Abstract:
Design and Optimization of Steering Trapezium for Formula SAE
SHAO Fei, LI Chuanchang, XU Huayuan
2018, 32(1): 58-63. doi: 10.3969/j.issn.1009-444X.2018.01.013
Abstract:
Optimization Method for Gross Error Processing of Traffic Data Based on Pauta Criterion
XU Chenhui, MA Minghui
2018, 32(1): 64-67. doi: 10.3969/j.issn.1009-444X.2018.01.014
Abstract:
Flower Pollination Algorithm Based on Memory Information
WANG Hai, ZHAO Qihui, LIU Sheng
2018, 32(1): 68-72. doi: 10.3969/j.issn.1009-444X.2018.01.015
Abstract:
Parameter Calibration and Imaging Analysis of CT System Based on Radon Inversion
WANG Jiawei, CHEN Zhen, ZHANG Zizhen
2018, 32(1): 73-78. doi: 10.3969/j.issn.1009-444X.2018.01.016
Abstract:
Research on Factors Influencing Total Factor Productivity of Regional Industry
DANG Yan, YE Xinliang
2018, 32(1): 79-85. doi: 10.3969/j.issn.1009-444X.2018.01.017
Abstract:
Research on Investment Portfolio and Strategies of Pension Fund
WANG Lina
2018, 32(1): 86-90. doi: 10.3969/j.issn.1009-444X.2018.01.018
Abstract:
Scene Change Detection Algorithm and Implementation Based on Double Threshold Gray Histogram
LU Siye, LI Hongyan, SUN Jianhao, SONG Ze, CAO Yu
2018, 32(1): 91-94. doi: 10.3969/j.issn.1009-444X.2018.01.019
Abstract: