Citation: | LIU Rui, ZHU Zina, ZHANG Bangjing, CHEN Saixuan. Simulation and experimental of temperature field of hybrid magnetizing magnetic gear composite motor[J]. Journal of Shanghai University of Engineering Science, 2023, 37(3): 215-221. doi: 10.12299/jsues.22-0090 |
[1] |
李和明, 李俊卿. 电机中温度计算方法及其应用综述[J] . 华北电力大学学报(自然科学版),2005,32(1):5.
|
[2] |
ZHANG F G, WANG S Y, LIU G W, et al. Electromagnetic design and temperature field analysis of a high speed permanent magnet claw motor with outer rotor[C]//Proceedings of 2015 18th International Conference on Electrical Machines and Systems (ICEMS). Pattaya: EEAAT, 2015.
|
[3] |
YANG C X, ZHANG Y, QIU H B. Influence of output voltage harmonic of inverter on loss and temperature field of permanent magnet synchronous motor[J] . IEEE Transactions on Magnetics,2019,55(6):1 − 5.
|
[4] |
吴尧辉, 方鑫. 不同负载下的电机温度场计算[J] . 微特电机,2020,48(12):27 − 31. doi: 10.3969/j.issn.1004-7018.2020.12.007
|
[5] |
CHU S, LIANG D, JIA S, et al. Research and analysis on design characteristics of high temperature and high- speed permanent magnet motor[C]//Proceedings of 2020 International Conference on Electrical Machines (ICEM). Gothenburg: [s.n.], 2020.
|
[6] |
CHEN H, WANG K, YAN W, et al. Temperature analysis of switched reluctance motor based on equivalent heat circuit method[J] . IEEE Transactions on Applied Superconductivity,2021,31(8):1 − 4.
|
[7] |
刘金. 磁齿轮复合电机内转子涡流损耗分析与设计[D]. 镇江: 江苏大学, 2017.
|
[8] |
田野. 容错磁齿轮复合电机损耗特性研究及优化设计[D]. 镇江: 江苏大学, 2016.
|
[9] |
杨忠学. 油田抽油机用新型磁场调制式复合电机的设计研究[D]. 大庆: 东北石油大学, 2017.
|
[10] |
顾玲玲. 电动车用自减速永磁轮毂电机温度场及其优化设计研究[D]. 南京: 东南大学, 2015.
|
[11] |
ARMOR A F, CHARI M V K. Heat flow in the stator core of large turbine-generators, by the method of three-dimensional finite elements (part I: Analysis by scalar potential formulation)[J] . IEEE Transactions on Power Apparatus and Systems,1976,95(5):1648 − 1656. doi: 10.1109/T-PAS.1976.32264
|
[12] |
EMANUEL A E. Estimating the Effects of Harmonic Voltage Fluctuations on the Temperature Rise of Squirrel-Cage Motors[J] . IEEE Transactions on Energy Conversion (Institute of Electrical and Electronics Engineers),1991,6(1):162 − 169.
|