Citation: | WEI Shiping, LI Cong. Design and optimization of dimethyl ether reforming reactor for hydrogen production[J]. Journal of Shanghai University of Engineering Science, 2023, 37(4): 335-342. doi: 10.12299/jsues.22-0242 |
[1] |
ADENIYI A G, IGHALO J O, ELETTA O A A. Process integration and feedstock optimisation of a two-step biodiesel production process from jatropha curcas using aspen plus[J] . Chemical Product and Process Modeling,2018,14(2):2018 − 0055.
|
[2] |
FAN F Y, ZHAO L, HOU H, ZHANG Q. Insights into the CO formation mechanism during steam reforming of dimethyl ether over NiO/Cu-based catalyst[J] . Industrial & Engineering Chemistry Research,2019,58(8):3440 − 3449.
|
[3] |
刘江华. 氢能源: 未来的绿色能源[J] . 现代化工,2006(S2):10 − 13,15. doi: 10.16606/j.cnki.issn0253-4320.2006.s2.003
|
[4] |
KAJORNSAK F, NAWIN V, WIWUT T. Evaluation of the thermodynamic equilibrium of the autothermal reforming of dimethyl ether[J] . International Journal of Hydrogen Energy,2011,36(10):5865 − 5874. doi: 10.1016/j.ijhydene.2011.02.027
|
[5] |
SONG J W, CHOI M Y, LEE J, et al. Improvement of fuel economy and greenhouse gases reduction in gasoline powered vehicles through the TWC-NOx trap catalyst[J] . International Journal of Automotive Technology,2020,21(2):441 − 449. doi: 10.1007/s12239-020-0041-8
|
[6] |
SWMWISBERGER T A, BORUP R L. Thermodynamic equilibrium calculations of dimethyl ether steam reforming and dimethyl ether hydrolysis[J] . Journal of Power Soures,2005,152(10):87 − 96.
|
[7] |
FENG D M, WANG Y Y, WANG D, et al. Steam reforming of dimethyl ether over Cu-ZnO-Al2O3-ZrO2 + ZSM-5: A kinetic study[J] . Chemical Engineering Journal,2009,146(2):477 − 485.
|
[8] |
WANG S, ISHIHARA T, TAKITA Y. Partial oxidation of dimethyl ether over various supported metal catalysts[J] . Applied Catalysis A: General,2002,228(1/2):167 − 176. doi: 10.1016/S0926-860X(01)00985-1
|
[9] |
LI C, GAO Y, WU C. Modeling and simulation of hydrogen production from dimethyl ether steam reforming using exhaust gas[J] . International Journal of Energy Research,2015,39(9):1272 − 1279. doi: 10.1002/er.3330
|
[10] |
寇素原, 王晓蕾, 任克威, 等. 二甲醚水蒸气重整制氢过程的热力学分析[J] . 天然气化工(C1化学与化工),2009,34(1):35 − 40.
|
[11] |
CHEN Y, ZHANG C, WU R, et al. Methanol steam reforming in microreactor with constructal tree-shaped network[J] . Journal of Power Sources,2011,196(15):6366 − 6373. doi: 10.1016/j.jpowsour.2011.03.044
|
[12] |
YAO F, CHEN Y, PETERSON G P. Hydrogen production by methanol steam reforming in a disc microreactor with tree-shaped flow architectures[J] . International Journal of Heat and Mass Transfer,2013,64:418 − 425. doi: 10.1016/j.ijheatmasstransfer.2013.04.057
|
[13] |
AN H, LI A, SASMITO A P, et al. Computational fluid dynamics (CFD) analysis of micro-reactor performance: Effect of various configurations[J] . Chemical Engineering Science,2012,75:85 − 95. doi: 10.1016/j.ces.2012.03.004
|
[14] |
CHEN S Y, Li C, REN H J. Design and optimization of reforming hydrogen production reaction system for automobile fuel cell[J] . International Journal of Hydrogen Energy,2021,46(49):25252 − 25263. doi: 10.1016/j.ijhydene.2021.05.035
|
[15] |
XU D, LI C. Design and optimization of dimethyl ether steam-reforming reactor[J] . Journal of Energy Engineering,2022,148(2):1943.
|
[16] |
ZHANG T Q, OU K, JUNG S H, et al. Dynamic analysis of a PEM fuel cell hybrid system with an on-board dimethyl ether (DME) steam reformer (SR)[J] . International Journal of Hydrogen Energy,2018,43(29):13521 − 13531. doi: 10.1016/j.ijhydene.2018.05.098
|