Citation: | GUO Genqing, WANG Keyong. Investigations on extrusion gear of feed mechanism of fused deposition 3D printer[J]. Journal of Shanghai University of Engineering Science, 2023, 37(4): 404-408. doi: 10.12299/jsues.22-0287 |
[1] |
卢秉恒. 增材制造技术: 现状与未来[J] . 中国机械工程,2020,31(1):19 − 23. doi: 10.3969/j.issn.1004-132X.2020.01.003
|
[2] |
FU Y, DOWNEY A, YUAN L, et al. In situ monitoring for fused filament fabrication process: A review[J] . Additive Manufacturing,2021,38:101749. doi: 10.1016/j.addma.2020.101749
|
[3] |
ALSOUFI M S, ELSAYED A. Warping deformation of desktop 3D printed parts manufactured by open source fused deposition modeling (FDM) system[J] . International Journal of Mechanical & Mechatronics Engineering,2017,17(11):7 − 16.
|
[4] |
SCOTT J, GUPTA N, WEMBER C, et al. Additive manufacturing: Status and opportunities [R]. Washington: Science and Technology Policy Institute, 2012.
|
[5] |
王琛. 3D打印快速成型计算机切片处理误差分析[J] . 软件,2021,42(4):87 − 89. doi: 10.3969/j.issn.1003-6970.2021.04.027
|
[6] |
赵延国, 柳传鑫, 许淙博, 等. 3D打印技术及设备发展现状[J] . 机械研究与应用,2021,34(3):224 − 227. doi: 10.16576/j.cnki.1007-4414.2021.03.067
|
[7] |
DUDEK P. FDM 3D printing technology in manufacturing composite elements[J] . Archives of metallurgy and materials,2013,58(4):1415 − 1418. doi: 10.2478/amm-2013-0186
|
[8] |
WU P, WANG J, WANG X. A critical review of the use of 3-D printing in the construction industry[J] . Automation in Construction,2016,68:21 − 31. doi: 10.1016/j.autcon.2016.04.005
|
[9] |
余少华. 一种FDM的3D扫描打印装置送料机构: CN203876233U[P]. 2014− 10− 15.
|
[10] |
马志刚, 王会良. 熔融沉积3D打印机的送丝机构优化设计[J] . 现代信息科技,2019,3(24):160 − 162, 164. doi: 10.3969/j.issn.2096-4706.2019.24.059
|
[11] |
迟耀东, 王进峰. 熔融沉积快速成型送丝机构的研究与设计[J] . 现代制造工程,2017(6):69 − 72, 98. doi: 10.16731/j.cnki.1671-3133.2017.06.012
|
[12] |
FIEDLER M. Evaluating tension and tooth geometry to optimize grip on 3D printer filament[J] . 3D Printing and Additive Manufacturing,2015,2(2):85 − 88. doi: 10.1089/3dp.2015.0011
|
[13] |
HU Q, DUAN Y, ZHANG H, et al. Manufacturing and 3D printing of continuous carbon fiber prepreg filament[J] . Journal of materials science,2018,53(3):1887 − 1898. doi: 10.1007/s10853-017-1624-2
|
[14] |
TAKAHASHI H, MIYASHITA H. Expressive fused deposition modeling by controlling extruder height and extrusion amount[C]//Proceedings of the 2017 CHI Conference on Human Factors in Computing Systems. Denver Colorado: SIGCHI, 2017: 5065−5074.
|
[15] |
GREEFF G P, SCHILLING M. Closed loop control of slippage during filament transport in molten material extrusion[J] . Additive Manufacturing,2017,14:31 − 38. doi: 10.1016/j.addma.2016.12.005
|
[16] |
TLEGENOV Y, WONG Y S, HONG G S. A dynamic model for nozzle clog monitoring in fused deposition modelling[J] . Rapid Prototyping Journal,2017,23(2):391 − 400. doi: 10.1108/RPJ-04-2016-0054
|
[17] |
ABILGAZIYEV A, KULZHAN T, RAISSOV N, et al. Design and development of multi-nozzle extrusion system for 3D printer[C]//Proceedings of 2015 International Conference on Informatics, Electronics & Vision (ICIEV). Fukuoka: IEEE, 2015: 1−5.
|
[18] |
NIENHAUS V, SPIEHL D, DORSAM E. Investigations on roller-based filament drives[J] . Journal of Manufacturing and Materials Processing,2021,5(2):53. doi: 10.3390/jmmp5020053
|