Citation: | ZHU Wenbin, LIU Yong, ZHAI Changmin. Configuration design and workspace solution of six degrees of freedom walking machining robot[J]. Journal of Shanghai University of Engineering Science, 2021, 35(2): 158-162. |
[1] |
韩锋, 田威, 廖文和, 等. 基于并联机构的轻型自主爬行钻铆系统法向调姿算法[J] . 航空学报,2015(6):2083 − 2090.
|
[2] |
吴彦星. 基于并联机构的搅拌摩擦焊机床柔顺控制研究[D]. 秦皇岛: 燕山大学, 2017.
|
[3] |
孔垂麟, 姜秀梅, 岳永铭, 等. 四足仿生机器人斜面行走的运动研究[J] . 机械与电子,2019,37(7):58 − 63. doi: 10.3969/j.issn.1001-2257.2019.07.012
|
[4] |
LI Y Z, YAO Y A, HE Y Y. Design and analysis of a multi-mode mobile robot based on a parallel mechanism with branch variation[J] . Mechanism and Machine Theory,2018,130:276 − 300.
|
[5] |
王晓磊, 金振林, 李晓丹, 等. 串并混联四足仿生机器人动力学建模与分析[J] . 农业机械学报,2019,50(4):401 − 412.
|
[6] |
PAN Y, GAO F. Position model computational complexity of walking robot with different parallel leg mechanism topology patterns[J] . Mechanism and Machine Theory,2017,107:324 − 337. doi: 10.1016/j.mechmachtheory.2016.09.016
|
[7] |
SUGAHARA Y, HOSOBATA T, MIKURIYA Y,et al. Realization of dynamic human-carrying walking by a biped locomotor[C]//IEEE International Conference on Robotics and Automation, New Orleans, 2004.
|
[8] |
CARBONE G, SUGAHARA Y, LIM H O, et al. Stiffness performances estimation for biped locomotor WL-15[C]//Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003), Kobe, 2003.
|
[9] |
FUJII F. The largest two-legged walking robot in Kansai in hazardous locations[J] . Robot Laboratory,2005(19):7 − 12.
|
[10] |
HE J, GAO F. Type Synthesis for Bionic Quadruped Walking Robots[J] . Journal of Bionic Engineering,2015,12(4):527 − 538. doi: 10.1016/S1672-6529(14)60143-8
|
[11] |
潘阳. P-P结构六足机器人性能设计与控制实验研究[D]. 上海: 上海交通大学, 2014.
|
[12] |
荣誉, 金振林, 崔冰艳. 六足农业机器人并联腿构型分析与结构参数设计[J] . 农业工程学报,2012(15):9 − 14.
|
[13] |
王洪波, 齐政彦, 胡正伟,等. 并联腿机构在四足/两足可重组步行机器人中的应用[J] . 机械工程学报,2009(8):24 − 30.
|
[14] |
金振林, 何小静. 一种新型3-UPS并联机构及其工作空间分析[J] . 燕山大学学报,2011(3):203 − 207,227. doi: 10.3969/j.issn.1007-791X.2011.03.003
|
[15] |
刘志忠, 柳洪义, 罗忠, 等. 机器人工作空间求解的蒙特卡洛法改进[J] . 农业机械学报,2013(1):230 − 235. doi: 10.6041/j.issn.1000-1298.2013.01.043
|
[16] |
段学超, 仇原鹰, 段宝岩. 大射电望远镜精调Stewart平台工作空间研究[J] . 电子机械工程,2004(5):55 − 58. doi: 10.3969/j.issn.1008-5300.2004.05.016
|
[17] |
黄真, 孔令富, 方跃法. 并联机器人机构学理论及控制[M]. 北京: 机械工业出版社, 1997.
|