Citation: | LIU Zhenxiong, XU Gang, CAO Wentao, MA Chunwei. Influence of weld width on fatigue strength of butt joint[J]. Journal of Shanghai University of Engineering Science, 2021, 35(2): 107-112, 143. |
[1] |
陈传尧. 疲劳与断裂[M]. 武汉: 华中科技大学出版社, 2002: 1 − 90.
|
[2] |
方洪渊. 焊接结构学[M]. 北京: 机械工业出版社, 2008: 78 − 112.
|
[3] |
BONI L, LANCIOTTI A, POLESE C. “Size effect” in the fatigue behavior of Friction Stir Welded plates[J] . International Journal of Fatigue,2015,80(3):238 − 245.
|
[4] |
JAURRIETA M A, ALONSO A, CHICA J A, et al. Tubular Structures X[C]//Proceedings of the 10th International Symposium on Tubular Structures. Abingdon: TaylorFrancis, 2017: 365 – 374.
|
[5] |
张欣, 高世一, 吴文兵, 等. 焊缝余高对焊接接头疲劳寿命影响的有限元分析[J] . 热加工工艺,2017,46(1):189 − 194.
|
[6] |
冯继军. 焊接结构件的疲劳分析[J] . 焊接技术,2017,46(6):78 − 80.
|
[7] |
DONG P S, HONG J K,JESUS A M. Analysis of recent fatigue data using the structural stress procedure in ASME Div 2 rewrite[J] . Journal of Pressure Vessel Technology,2007,19(3):355 − 362.
|
[8] |
DONG P. A structural stress definition and numerical implementation for fatigue analysis of welded joints[J] . International Journal of Fatigue,2001,23(10):865 − 876. doi: 10.1016/S0142-1123(01)00055-X
|
[9] |
ZERBST U, HENSEL J. Application of fracture mechanics to weld fatigue[J] . International Journal of Fatigue,2020,2(3):139 − 141.
|
[10] |
李林平, 梁军, 赵雷, 等. 高、低匹配对G115/T92异种钢接头组织与力学性能的影响[J] . 机械工程材料,2018,42(10):51 − 57. doi: 10.11973/jxgccl201810010
|
[11] |
吴松林, 薛钢, 曲占元. 低匹配对接接头尺寸设计原则研究[J] . 材料开发与应用,2014,29(1):14 − 17.
|
[12] |
赵峰. 基于网格不敏感结构应力的铝合金焊接接头疲劳性能分析[D]. 大连: 大连交通大学, 2013.
|
[13] |
罗超, 张锦华, 王琰, 等. 板厚对不锈钢车体激光叠焊接头抗剪强度和疲劳强度的影响[J] . 焊接,2021(2):57 − 61.
|