Research Progress of Graphene Reinforced Titanium Matrix Composites
-
摘要: 石墨烯作为增强相添加到钛基复合材料中能提高其各项性能. 通过对文献的梳理,介绍石墨烯增强钛基复合材料的制备方法及相关性能,并概述界面结构和增强机理的研究,最后对石墨烯增强钛基复合材料的未来发展趋势进行展望.Abstract: Graphene can improve the properties of titanium matrix composites by adding graphene as reinforcement phase. Through the literature review, the preparation methods and related properties of graphene reinforced titanium matrix composites were introduced, and researches on interface structure and reinforcement mechanism were summarized. Finally, the future development trend of graphene reinforced titanium matrix composites was prospected.
-
Key words:
- graphene /
- titanium matrix composites /
- mechanical properties /
- strengthening mechanism
-
[1] ZHU Y W, MURALI S, CAI W W, et al. Graphene and graphene oxide: Synthesis, properties, and applications[J] . Advanced Materials,2010,22(35):3906 − 3924. doi: 10.1002/adma.201001068 [2] WANG J Y, LI Z Q, FAN G L, et al. Reinforcement with graphene nanosheets in aluminum matrix composites[J] . Scripta Materialia,2012,66(8):594 − 597. doi: 10.1016/j.scriptamat.2012.01.012 [3] 李蒙, 凤伟中, 关蕾, 等. 航空航天紧固件用钛合金材料综述[J] . 上海有色金属材料与工程,2018,39(4):49 − 53. [4] ZHANG Z Y, LIANG Y L, CAO H C, et al. The preparation and mechanical properties of a pure titanium-based matrix composite reinforced with graphene nanoplatelets[J] . Science of Advanced Materials,2020,12(2):296 − 303. doi: 10.1166/sam.2020.3531 [5] 王剑桥, 雷卫宁, 薛子明, 等. 石墨烯增强金属基复合材料的制备及应用研究进展[J] . 材料工程,2018,46(12):18 − 27. doi: 10.11868/j.issn.1001-4381.2017.001534 [6] 孙峰, 王凯旋, 杨辉, 等. 石墨烯增强钛基复合材料制备工艺与性能研究[J] . 钛工业进展,2019,36(1):8 − 12. [7] 苏颖, 左倩, 杨刚, 等. 石墨烯增强钛基复合材料的压缩变形行为研究[J] . 稀有金属材料与工程,2017,46(12):3882 − 3886. [8] MU X N, CAI H N, ZHANG H M, et al. Uniform dispersion of multi-layer graphene reinforced pure titanium matrix composites via flake powder metallurgy[J] . Materials Science and Engineering: A,2018,725:541 − 548. doi: 10.1016/j.msea.2018.04.056 [9] 陈航, 弭光宝, 李培杰, 等. 氧化石墨烯对600 ℃高温钛合金微观组织和力学性能的影响[J] . 材料工程,2019,47(9):38 − 45. doi: 10.11868/j.issn.1001-4381.2019.000284 [10] ZHANG X J, SONG F, WEI Z P, et al. Microstructural and mechanical characterization of in-situ TiC/Ti titanium matrix composites fabricated by graphene/Ti sintering reaction[J] . Materials Science and Engineering: A,2017,705:153 − 159. doi: 10.1016/j.msea.2017.08.079 [11] ZHOU H T, SU Y J, NA L, et al. Modification of microstructure and properties of Ti-47Al-2Cr-4Nb-0.3W alloys fabricated by SPS with trace multilayer graphene addition[J] . Materials Characterization,2018,138:1 − 10. doi: 10.1016/j.matchar.2018.01.036 [12] 王伟, 周海雄, 王庆娟, 等. 石墨烯增强钛基复合材料的摩擦学性能研究[J] . 兵器材料科学与工程,2019,42(1):26 − 32. [13] CAO Z, WANG X D, LI J L, et al. Reinforcement with graphene nanoflakes in titanium matrix composites[J] . Journal of Alloys Compounds,2017,696:498 − 502. doi: 10.1016/j.jallcom.2016.11.302 [14] LIU J Q, HU N, LIU X Y, et al. Microstructure and mechanical properties of graphene oxide-reinforced titanium matrix composites synthesized by hot-pressed sintering[J] . Nanoscale Research Letters,2019,14(1):114 − 126. doi: 10.1186/s11671-019-2951-9 [15] 王丽君. 发动机用石墨烯表面镀Cu增强钛基复合材料的制备及力学性能[J] . 粉末冶金工业,2018,28(3):57 − 60. [16] HU Z G, TONG G Q, NIAN Q, et al. Laser sintered single layer graphene oxide reinforced titanium matrix nanocomposites[J] . Composites Part B: Engineering,2016,93:352 − 359. doi: 10.1016/j.compositesb.2016.03.043 [17] YANG W Z, HUANG W M, WANG Z F, et al. Thermal and mechanical properties of graphene–titanium composites synthesized by microwave sintering[J] . Acta Metallurgica Sinica(English Letters),2016,29(8):707 − 713. doi: 10.1007/s40195-016-0445-7 [18] THOMAS T, ZHANG C, SAHU A, et al. Effect of graphene reinforcement on the mechanical properties of Ti2AlC ceramic fabricated by spark plasma sintering[J] . Materials Science and Engineering: A,2018,728:45 − 53. doi: 10.1016/j.msea.2018.05.006 [19] HU Z R, LI Y, FAN X L, et al. Mechanical and tribological property of single layer graphene oxide reinforced titanium matrix composite coating[J] . AIP Conference Proceedings. 2018,1955(1):020014. [20] ZHANG Z Y, ZHU Y, LIANG Y L, et al. Preparation and thermal properties of graphene nanosheet/Ti composites[J] . Proceedings of 2017 International Conference On Structural, Mechanical And Materials Engineer. Seoul: IETP,2017. [21] 胡增荣, 童国权, 张超, 等. 激光烧结石墨烯钛纳米复合材料及其耐腐蚀性能[J] . 中国表面工程,2015,28(6):127 − 132. doi: 10.11933/j.issn.1007-9289.2015.06.017 [22] 席少静. 碳纤维增强钛基复合材料的界面与性能研究[D]. 长春: 长春工业大学, 2016. [23] BAGCHI S, KE C H, CHEW H B. Oxidation effect on the shear strength of graphene on aluminum and titanium surfaces[J] . Physical Review B,2018,98(17):174106. doi: 10.1103/PhysRevB.98.174106 [24] 徐欢, 郭相龙, 吕维洁. 原位自生TiC与TiB增强钛基复合材料的组织和力学性能[J] . 机械工程材料,2020,44(1):62 − 67, 73. doi: 10.11973/jxgccl202001011 [25] FU W, HU S P, SONG X G, et al. Wettability and bonding of graphite by Sn0.3Ag0.7Cu-Ti alloys[J] . Carbon,2017,121:536 − 543. doi: 10.1016/j.carbon.2017.06.030 [26] 何小晶, 原梅妮, 李立州, 等. 石墨烯增强钛基复合材料界面的第一性原理研究[J] . 热加工工艺,2018(10):96 − 100. [27] 陈斌溢. 石墨烯/Ti基复合材料界面性质和力学行为的原子尺度模拟[D]. 哈尔滨: 哈尔滨工业大学, 2019. [28] MU X N, CAI H N, ZHANG H M, et al. Uniform dispersion and interface analysis of nickel coated graphene nanoflakes/pure titanium matrix composites[J] . Carbon,2018,137:146 − 155. doi: 10.1016/j.carbon.2018.05.013 [29] ZHANG F M, WANG J, LIU T F, et al. Enhanced mechanical properties of few-layer graphene reinforced titanium alloy matrix nanocomposites with a network architecture[J] . Materials and Design,2020,186:108330. doi: 10.1016/j.matdes.2019.108330 [30] 李勇, 赵亚茹, 李焕, 等. 石墨烯增强金属基复合材料的研究进展[J] . 材料导报,2016,30(11):71 − 76. [31] SONG Y, CHEN Y, LIU W W, et al. Microscopic mechanical properties of titanium composites containing multi-layer graphene nanofillers[J] . Materials and Design,2016,109:256 − 263. doi: 10.1016/j.matdes.2016.07.077
点击查看大图
计量
- 文章访问数: 316
- HTML全文浏览量: 248
- PDF下载量: 129
- 被引次数: 0