Analysis of influence of reinforcement of a rail transit long-span continuous beam bridge on dynamic characteristics of tracks
-
摘要: 针对某桥梁跨下挠变形未收敛而进行桥墩加固的问题,通过对其上线路轨道结构位移及振动状态进行监测,提出钢轨位移及振动、尖轨密贴状态和承轨台振动的监测方法,讨论桥墩加固前后监测数据的时域变化规律,评估加固施工对轨道实际服役的影响。结果表明,采用跨中加设墩柱及增加200 t顶升力的地铁桥加固方案,可以有效改善道床和钢轨的稳定性;在列车运行条件下,钢轨动态位移显著减小,轨道结构刚度有所增强,但钢轨和道床的振动幅度有一定程度的增大。对后续类似轨道交通大跨度连续梁桥加固工程,建议用现场监测方式对施工期轨道服役状态进行管理。Abstract: To address the problem of pier reinforcement for a bridge span whose midspan deflection had not converged, the displacement and vibration states of the track structure on the upper line were monitored. A monitoring method was proposed that covered rail displacement and vibration, switch rail closure state, and bearing block vibration. The time-domain variation rules of the monitoring data before and after pier reinforcement were discussed, and the influence of the reinforcement construction on the in-service behavior of the track was evaluated. The results show that the subway bridge reinforcement scheme of adding pier columns at midspan and applying an additional jacking force of 200 t can effectively improve the stability of the track bed and rails. Under train operation conditions, the dynamic displacement of the rails is significantly reduced and the stiffness of the track structure is enhanced, but the vibration amplitudes of the rails and the track bed increase to a certain extent. It is suggested that in future reinforcement projects of similar rail transit long-span continuous beam bridges, on-site monitoring be adopted to manage the service state of the track during construction.
-
Key words:
- long-span continuous beam /
- reinforcement analysis /
- track structure /
- on-site monitoring
-
表 1 监测组件参数
Table 1. Monitoring component parameters
监测要素 传感器类型 主要参数 钢轨横向位移 激光位移传感器 24 V DC,量程200 ± 80 mm,
重复精度200 μm尖轨密贴 激光位移传感器 24 V DC,量程200 ± 80 mm,
重复精度200 μm钢轨垂向振动 IEPE压电振动传感器 量程 ± 200g,灵敏度25 mV/g,
0.5~10 000 Hz承轨台垂向振动 IEPE压电振动传感器 量程 ± 10g,灵敏度500 mV/g,
0.3~2500 Hz表 2 钢轨动态横向位移监测数据
Table 2. Rail dynamic lateral displacement monitoring data
单位:mm 监测位置 加固前/加固后 位移最大值 位移平均值 截面4 加固前 2.55 2.43 截面4 加固后 2.16 2.11 表 3 伸缩器尖轨密贴监测数据
Table 3. Monitoring data of expansion point rail sticking
单位:mm 监测位置 加固前/加固后 位移最大值 位移平均值 截面1 加固前 0.40 0.34 截面1 加固后 0.36 0.34 截面2 加固前 0.30 0.27 截面2 加固后 0.22 0.20 表 4 钢轨振动监测数据
Table 4. Rail vibration monitoring data
单位:m/s2 监测位置 加固前/加固后 钢轨振动最大值 钢轨振动平均值 截面1 加固前 91.31 85.10 截面1 加固后 91.67 87.80 截面2 加固前 117.69 100.03 截面2 加固后 120.17 108.48 表 5 承轨台振动监测数据
Table 5. Vibration monitoring data of bearing platform
单位:m/s2 监测位置 加固前/加固后 承轨台振动最大值 承轨台振动平均值 截面1 加固前 2.45 2.05 截面1 加固后 2.58 2.20 截面2 加固前 3.74 3.63 截面2 加固后 5.04 3.85 -
[1] 翟婉明, 赵春发. 现代轨道交通工程科技前沿与挑战[J] . 西南交通大学学报, 2016, 51(2): 209 − 226. [2] 陶文彬. 上海地铁11号线列车运行模式丢失故障分析[J] . 交通与运输, 2021, 37(1): 43 − 46. [3] 刘能文, 王益, 秦永刚. 城市复杂交通状况下典型桥梁加固方案分析与选择[J] . 市政技术, 2022, 40(9): 103 − 109. [4] 徐孝辉. 基于模糊层次分析法的桥梁加固方案比选研究[J] . 施工技术(中英文), 2022, 51(15): 16 − 19. doi: 10.7672/sgjs2022150016 [5] 王艳, 刘哲, 周瑞娇, 等. 基于车桥耦合振动分析的大跨径曲弦桁梁桥加固方案评价研究[J] . 振动与冲击, 2022, 41(14): 199 − 209. doi: 10.13465/j.cnki.jvs.2022.14.027 [6] 孔令楠, 郝伟. 基于博弈论和证据理论的桥梁加固方案优选研究[J] . 铁道科学与工程学报, 2020, 17(3): 556 − 562. [7] 周华威, 汪志春, 朱慈祥, 等. 运营桥梁抬桩加固沉降分析及监测技术[C] //中国公路学会养护与管理分会第八届学术年会论文集. 厦门: 中国公路学会养护与管理分会, 2018: 61 − 69. [8] 赵庆云, 张运清, 孟涛, 等. 基于不中断交通伴随监测的桥梁加固评价研究[J] . 公路, 2019, 64(5): 79 − 83. [9] 王俊博, 金耀, 陈文礼, 等. 基于自动化监测系统的某大跨度悬索桥维修加固分析评价研究[J] . 公路, 2024, 69(1): 145 − 150. [10] Zampieri P, Piazzon R, Niero L, et al. Damaged masonry arch bridges strengthened with external post-tensioning: experimental and numerical results[J] . Engineering Structures, 2024, 318: 117929. doi: 10.1016/j.engstruct.2024.117929 [11] Yang J, Yang C Q, Zhang Y, et al. Safety monitoring and effect evaluation of variable cross-section continuous box-girder bridges strengthened with external Prestressing[J] . Journal of Performance of Constructed Facilities, 2023, 37(2): 04022082. doi: 10.1061/JPCFEV.CFENG-4272 -
下载: