Study on high speed water impact characteristics of airfoil jettisoned FDR
-
摘要: 在航空领域,抛放式飞行数据记录器(flight data recorder, FDR)入水问题的相关标准规范较缺乏,对其深入研究可为航空技术发展提供理论支持。基于有限体积法与嵌套网格技术,构建抛放式FDR高速入水冲击过程模型,分析不同因素对流体动力特性的影响。结果表明:翼型结构入水性能优于长方体型和圆柱体型;入水初速度从60 m/s到100 m/s,砰击压力峰值增至2.78倍,与速度平方成正比,入水位移增幅加倍;入水角度增大,砰击压力峰值降低,速度衰减速率减小,入水位移最大增加35%,小角度更利于水中快速稳定;增加壳体厚度可减小速度衰减速率,增大最大入水位移,增强抗冲击性能。
-
关键词:
- 翼型 /
- 抛放式飞行数据记录器 /
- 嵌套网格技术 /
- 流体动力学 /
- 砰击压力
Abstract: In the aviation field, there is a lack of relevant standards and norms for the water entry issue of jettisoned flight data recorders (FDRs). In-depth research on it can provide theoretical support for the development of aviation technology. Based on the finite volume method and nested grid technology, a model for the high-speed water entry impact process of a deployable FDR was constructed, and the effects of different factors on hydrodynamic characteristics were analyzed. The results show that the water entry performance of the airfoil structure is superior to those of the rectangular and cylindrical structures. When the initial water entry velocity increases from 60 m/s to 100 m/s, the peak slamming pressure increased to 2.78 times, which is proportional to the square of the velocity, and the water entry displacement increment doubled. As the water entry angle increases, the peak slamming pressure decreases, the velocity decay rate decreases, and the maximum water entry displacement increases by 35%, indicating that a smaller angle is more conducive to rapid stabilization in water. Increasing the shell thickness can reduce the velocity decay rate, increase the maximum water entry displacement, and enhance impact resistance. -
-
[1] 赵国栋, 徐悦, 朱海涛, 等. 氢燃料通用航空器发展及飞行安全问题探讨[J] . 航空科学技术, 2023, 34(12): 9 − 19. doi: 10.19452/j.issn1007-5453.2023.12.002 [2] 柯燕. 飞行记录器和应急定位发射机发展趋势[J] . 航空维修与工程, 2021(10): 22 − 25. doi: 10.3969/j.issn.1672-0989.2021.10.005 [3] 马英杰. 民用飞机抛放式飞行记录器分离过程仿真研究[J] . 航空科学技术, 2018, 29(12): 47 − 52. doi: 10.19452/j.issn1007-5453.2018.12.047 [4] 魏卓慧, 王树山, 马峰. 刚性截锥形弹体入水冲击载荷[J] . 兵工学报, 2010, 31(增刊1): 118 − 120. [5] Zhang Z Y. Research on the process of vertical water entry experiment of truncated cone-shaped projectile[J] . Journal of Physics: Conference Series, 2024, 2808(1): 012051. doi: 10.1088/1742-6596/2808/1/012051 [6] Sui Y T, Ming F R, Wang S P, et al. Experimental investigation on the impact force of the oblique water entry of a slender projectile with spring buffer[J] . Applied Ocean Research, 2023, 138: 103631. doi: 10.1016/j.apor.2023.103631 [7] Zhang Z F, Xie Y J, Wang D P, et al. Numerical study of water entry of vehicle under near free surface caused by underwater explosion[J] . Ocean Engineering, 2023, 289(Pt 1): 116180. [8] 杨恺昕, 罗凯, 黄闯, 等. 非回转体航行器高速斜入水过程研究[J] . 西北工业大学学报, 2023, 41(4): 635 − 643. doi: 10.1051/jnwpu/20234140635 [9] 付梦思, 薛普, 秦绪国, 等. 基于流固耦合的入水特性仿真与试验研究[J] . 导弹与航天运载技术(中英文), 2023(4): 123 − 127. doi: 10.7654/j.issn.2097-1974.20230423 [10] Hao C L, Dang J J, Huang C, et al. Study on load characteristics of high-speed water-entry of large caliber projectile[J] . Ocean Engineering, 2024, 57(4): 1 − 13. [11] Wei Z Y, Hu C H. An experimental study on water entry of horizontal cylinders[J] . Journal of Marine Science and Technology, 2014, 19(3): 338 − 350. doi: 10.1007/s00773-013-0252-z -
下载: