Optimization of anode-side performance of PEMWE with arc-sawtooth composite flow channel
-
摘要: 质子交换膜电解池(proton exchange membrane water electrolyzer,PEMWE)双极板流道的结构是影响电解水制氢效率的重要因素之一。提出一种弧形−锯齿复合的流道结构,利用SolidWorks建立三维等温模型,并在 Fluent 中进行数值模拟,研究其对PEMWE性能的影响。重点考察不同凸台高度、宽度对流道压降、出口氧气体积分数和气体覆盖面积的影响。研究结果表明:凸台高度为0.35 mm、宽度为0.4π mm的弧形−锯齿的流道复合结构可使气体覆盖面积降低51%;凸台高度为0.45 mm,宽度为0.6π mm的新型流道可使出口氧气体积分数的增长速率提升19.9%,从而使PEMWE表现出更优越的性能。Abstract: The structure of the bipolar plate flow channel in a proton exchange membrane water electrolyzer (PEMWE) is one of the important factors affecting the efficiency of hydrogen production by water electrolysis. An arc-sawtooth composite flow channel structure was proposed. A three-dimensional isothermal model was established using SolidWorks, and numerical simulations were carried out in Fluent to investigate the effect of this structure on PEMWE performance. The effects of different rib heights and widths on the pressure drop of the flow channel, the oxygen volume fraction at the outlet, and the surface gas coverage area were mainly investigated. The results show that the arc-sawtooth composite flow channel structure with a rib height of 0.35 mm and a width of 0.4π mm can reduce the gas coverage area by 51%; the new flow channel with a rib height of 0.45 mm and a width of 0.6π mm can increase the growth rate of the oxygen volume fraction at the outlet by 19.9%, thereby enabling the PEMWE to exhibit superior performance.
-
表 1 5种模型的具体数据
Table 1. Specific data of five models
单位:mm 模型 凸台高度 凸台宽度 1 0.35 0.5π 2 0.45 0.5π 3 0.25 0.5π 4 0.35 0.6π 5 0.35 0.4π 表 2 模型几何参数
Table 2. Model geometric parameters
几何参数 数值 直流道长度/mm 14 孔数 76 有效面积/cm2 4.12 流道高度/mm 1 流道宽度/mm 1 肋(脊)宽/mm 1 表 3 模型流体物性与边界条件
Table 3. Model fluid physical properties and boundary conditions
参数 值 氧气密度/(kg·m−3) 1 液态水密度/(kg·m−3) 970 入水口水速度/(m·s−1) 0.533 入口水体积分数 1 工作压强/kPa 101.325 氧气参考浓度/(mol·m−3) 56.40 表面张力系数/(N·m−1) 0.072 氧气入口速度/(m·s−1) 1 氢气参考浓度/(mol·m−3) 3.39 -
[1] Zhou Y K. Low-carbon transition in smart city with sustainable airport energy ecosystems and hydrogen-based renewable-grid-storage-flexibility[J] . Energy Reviews, 2022, 1(1): 100001. [2] Carmo M, Fritz D L, Mergel J, et al. A comprehensive review on PEM water electrolysis[J] . International Journal of Hydrogen Energy, 2013, 38(12): 4901 − 4934. [3] 廖孟柯, 张明扬, 袁铁江, 等. 电解水制氢−储氢−输氢多环节联合规划[J] . 中国电机工程学报, 2025, 45(24): 9602 − 9617. [4] 许传博, 王乐凯, 史超凡, 等. 多情景下我国氢能产业中长期供需结构及碳排放模拟研究[J] . 气候变化研究进展, 2025, 21(2): 221 − 235. [5] Grigoriev S A, Porembskiy V I, Korobtsev S V, et al. High-pressure PEM water electrolysis and corresponding safety issues[J] . International Journal of Hydrogen Energy, 2011, 36(3): 2721 − 2728. [6] Ito H, Maeda T, Nakano A, et al. Effect of flow regime of circulating water on a proton exchange membrane electrolyzer[J] . International Journal of Hydrogen Energy, 2010, 35(18): 9550 − 9560. [7] Qiu Y, Zhang R M, Liu C, et al. Numerical investigation on two-phase flow of PEM water electrolyzers under high operating pressures[J] . International Journal of Hydrogen Energy, 2025, 105: 817 − 834. [8] Zhang S Y, Xu H T, Qu Z G, et al. Bio-inspired flow channel designs for proton exchange membrane fuel cells: a review[J] . Journal of Power Sources, 2022, 522: 231003. [9] Liu M X, Fan W X, Lu G L. Study on mass transfer enhancement of locally improved structures and the application in serpentine and parallel flow fields of PEM fuel cells[J] . International Journal of Hydrogen Energy, 2023, 48(50): 19248 − 19261. [10] Zhang L H, Huang B, Zhou T J, et al. Enhancing oxygen transport performance with improved serpentine flow field on the anode side of the PEMEC[J] . International Journal of Hydrogen Energy, 2024, 82: 881 − 891. [11] Zhang X L, Wang J, Habudula G, et al. A review of gas-liquid flow characteristics of anode porous transport layer in proton exchange membrane electrolysis cell[J] . International Journal of Hydrogen Energy, 2025, 100: 1010 − 1029. [12] Selamet Ö F, Acar M C, Mat M D, et al. Effects of operating parameters on the performance of a high-pressure proton exchange membrane electrolyzer[J] . International Journal of Energy Research, 2013, 37(5): 457 − 467. [13] Frensch S H, Fouda-onana F, Serre G, et al. Influence of the operation mode on PEM water electrolysis degradation[J] . International Journal of Hydrogen Energy, 2019, 44(57): 29889 − 29898. [14] 刘斌, 白书战. 流道宽度和脊宽度对燃料电池极板流通特性的影响[J] . 内燃机与动力装置, 2023, 40(2): 36 − 41. [15] Immerz C, Schweins M, Trinke P, et al. Experimental characterization of inhomogeneity in current density and temperature distribution along a single-channel PEM water electrolysis cell[J] . Electrochimica Acta, 2018, 260: 582 − 588. [16] Wu J T, Li Y M, Wang Y. Three-dimension simulation of two-phase flows in a thin gas flow channel of PEM fuel cell using a volume of fluid method[J] . International Journal of Hydrogen Energy, 2020, 45(54): 29730 − 29737. -
下载: