木工用可转位封边刀及其切削性能

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

木工用可转位封边刀及其切削性能

易慧军, 秦哲, 袁慧, 陈翰源, 邹伟

文章导航 > 上海工程技术大学学报 > 2009 > 23(2): 101-105

易慧军, 秦哲, 袁慧, 陈翰源, 邹伟. 木工用可转位封边刀及其切削性能[J]. 上海工程技术大学学报, 2009, 23(2): 101-105. doi: 10.3969/j.issn.1009-444X.2009.02.002

引用本文:

易慧军, 秦哲, 袁慧, 陈翰源, 邹伟. 木工用可转位封边刀及其切削性能[J]. 上海工程技术大学学报, 2009, 23(2): 101-105. doi: 10.3969/j.issn.1009-444X.2009.02.002

YI Hui-jun, QIN Zhe, YUAN Hui, CHEN Han-yuan, ZOU Wei. Edge-Banding Cutter with Indexable Insert for Wood Working and Its Cutting Property[J]. Journal of Shanghai University of Engineering Science, 2009, 23(2): 101-105. doi: 10.3969/j.issn.1009-444X.2009.02.002

Citation:

YI Hui-jun, QIN Zhe, YUAN Hui, CHEN Han-yuan, ZOU Wei. Edge-Banding Cutter with Indexable Insert for Wood Working and Its Cutting Property[J]. Journal of Shanghai University of Engineering Science, 2009, 23(2): 101-105. doi: 10.3969/j.issn.1009-444X.2009.02.002

易慧军, 秦哲, 袁慧, 陈翰源, 邹伟. 木工用可转位封边刀及其切削性能[J]. 上海工程技术大学学报, 2009, 23(2): 101-105. doi: 10.3969/j.issn.1009-444X.2009.02.002

引用本文:

易慧军, 秦哲, 袁慧, 陈翰源, 邹伟. 木工用可转位封边刀及其切削性能[J]. 上海工程技术大学学报, 2009, 23(2): 101-105. doi: 10.3969/j.issn.1009-444X.2009.02.002

YI Hui-jun, QIN Zhe, YUAN Hui, CHEN Han-yuan, ZOU Wei. Edge-Banding Cutter with Indexable Insert for Wood Working and Its Cutting Property[J]. Journal of Shanghai University of Engineering Science, 2009, 23(2): 101-105. doi: 10.3969/j.issn.1009-444X.2009.02.002

Citation:

YI Hui-jun, QIN Zhe, YUAN Hui, CHEN Han-yuan, ZOU Wei. Edge-Banding Cutter with Indexable Insert for Wood Working and Its Cutting Property[J]. Journal of Shanghai University of Engineering Science, 2009, 23(2): 101-105. doi: 10.3969/j.issn.1009-444X.2009.02.002

木工用可转位封边刀及其切削性能

doi: 10.3969/j.issn.1009-444X.2009.02.002

广东工业大学机电工程学院,广州,510006
广州市天鹰精密工具有限公司,广州,511483
东华大学机械工程学院,上海,201620

中图分类号: TG501.3
计量
- 文章访问数: 217
- HTML全文浏览量: 70
- PDF下载量: 62
- 被引次数: 0
出版历程
- 刊出日期: 2009-06-30

Edge-Banding Cutter with Indexable Insert for Wood Working and Its Cutting Property

摘要: 通过可转位封边刀高速铣削的单因素实验研究切削力的变化规律,采用正交实验法优选切削参数,并以正交实验数据为基础推算出其切削力公式且对公式的准确性进行了验证.
- 可转位封边刀 /
- 切削 /
- 正交实验
Abstract: Single factor experiment was employed to find out the variational rules of cutting force while milling by edge-banding cutter with indexable insert, and orthogonal experiment was employed to optimize cutting pa-rameters. Based on the data from orthogonal experiment, the cutting force formula was figured out and its ac-curacy was certified.
- indexable insert edge-banding cutter /
- cutting /
- orthogonal experiment

参考文献(0)

资源附件(0)

WeChat

点击查看大图

计量

文章访问数: 217
HTML全文浏览量: 70
PDF下载量: 62
被引次数: 0

/

下载: 全尺寸图片幻灯片

分享

用微信扫码二维码

分享至好友和朋友圈

返回

版权所有 © 上海工程技术大学沪ICP备05052046号

电话：86-21-67791000Email：xuebao@sues.edu.cn

地址：中国上海市龙腾路333号邮政编码：201620

本系统由北京仁和汇智信息技术有限公司开发